CC30 Series Laser


click image to view larger

Internally we call this our customers Cash Cow laser, not ours! Why because its basically all the same components and electronics as the NGL laser but about 35% less in price!

The real cost savings comes from the new design and less labor required to build it. Basically a totally new way of building the laser on our end based on really understanding how cars are made in todays world. We stole as many ideas and concepts as we could from some tours we took and implemented them into the CC30 build.

The second cost reduction comes from using a lower power laser (unfortunately for both of us 30W is not 50% the price of 60 watts! We only wish, but it’s a savings none the less.)

Same for the scanner head. We use a German brand that is smaller than the American one and we also use smaller optics which is a big savings and because of the volume of lasers we are building we can now custom manufacture parts by subcontracting to companies that we were too small for just a few years ago. They have better facilities and technology than we have and can create a better product at a lower cost and that is passed on to you.

Originally we also removed the red light preview technology and made it a manual system. In 2014 we were able to add that into the package as an option. All of these things combined and adding to the fact that we priced the laser aggressively so that we can sell volume results in a price reduction of almost $30,000 on average.

The CC30 laser does the same things as the NGL basically but:

  • Instead of 360MM diameter work area its 320mm
  • Instead of 40,50, 60 or 100W it’s a 30 watt laser but it’s still Synrad not ceramic (YET!!)

For etching clothing nothing changes. Why? Because you generally etch at 15-20% power with a 40 or 60 watt laser. So here you might use 25-30% power, the end result is the same. One pass and you’re done.

For cutting clothing you will have to potentially do more passes instead of fewer when you need to cut through something that demands more power. If you have half the wattage and you can actually use 60 watts full power then you simply have to compensate using more passes.

The goal with this laser is that you don’t need on site setup install and training. Of course that is always available but there is almost no assembly required! You simply get some help in the office to take it off the pallet and lift it up just like Frankenstein off the operating table!

You do the setup yourself. You connect the exhaust or filter system yourself which is just like plugging in a central vacuum hose to the all, well OK a little more work than that, but you get the idea. You follow the video and save the cost of the tech on site. BUT you can always order the tech and get valuable tips, tricks and know how in person and be in production by lunchtime that very day!


Contact us for more info on our machines.